CNC Rotary Table
ø255
GVA-255HBⅡ
Worktable diameter Ø170, Ø210 , Ø255.
GVA-SB series is new "super multiple brake" mechanism for pneumatic clamp.
Full gear depth transmitted by dual lead worm drive, resulting in higher efficiency and lower backlash.
- SPECIFICATIONS
Specifications
| MODEL | Unit | GVA-255HBⅡ | |
|---|---|---|---|
| Worktable Diameter | mm / inch | Ø255 / Ø10.04 | |
| Center Bore Diameter | mm / inch | Ø140H7 / Ø5.51H7 | |
| Height of Center (Vertical) | mm / inch | 190 / 7.48 | |
| Width of T-slot | mm / inch | 12H7 / 0.47H7 | |
| Width of Guide Block | mm / inch | 18 / 0.71 | |
| Clamping Method / Pressure | MPa / psi | Hydraulic 5 / 725 |
|
| Clamping Torque | N.m / ft. lbs. | 900 / 663.3 | |
| Servo Motor Spec | Refer to Page 77 | ||
| Transmission Ratio | 1 / 120 | ||
| Max. Table Speed / At Specified Servo Motor Speed | min-1 | 22.2 / 2664 | |
| Allowable Loading Inertia | (W.D2/8) | kg.m2 | 1.21 |
| Resolution | deg. | 0.001 | |
| Indexing Accuracy | sec. | 15 | |
| Repeatability | sec. | 6 | |
| Net Weight (Servo Motor Excluded) | kg / lb | 149 / 328 | |
| Allowable Loading Capacity | Vertical | kg / lb | 150 / 330.0 |
| Rotary Tailstock Applied | kg / lb | 300 / 660 | |
|
FxL When Table Clamped |
 |
N / lbs. | 20000 / 4488 |
 |
N.m / ft. lbs. | 1700 / 1253.0 | |
 |
N.m / ft. lbs. | 900 / 663.3 | |
| Allowable Cutting Torque |  |
N.m / ft. lbs. | 550 / 405.35 |
Note:
1. Allowable cutting torque at table speed of 1 min-1.
2. FxL When table clamped is a reference data, the users should consider proper safety factor or contact detron for details.
1. Allowable cutting torque at table speed of 1 min-1.
2. FxL When table clamped is a reference data, the users should consider proper safety factor or contact detron for details.
