- Home
- Products
- 5 Axis
- GFA-S/H/HB Series
- CNC Tilting Rotary Table ø210
CNC Tilting Rotary Table ø210
GFA-210S/H
Worktable diameter Ø210, Ø255, Ø320.
The hydraulic brake equipped with radial and axial bearings.
Exclusive patented dual pneumatic piston braking system. (GFA-210S)
Enlarged the high precision cross roller bearing. (GFA-210S)
Full gear depth transmitted by dual lead worm drive, resulting in higher efficiency and lower backlash.
- SPECIFICATIONS
Specifications
| MODEL | Unit | GFA-210S/H | ||
|---|---|---|---|---|
| Worktable Diameter | mm / inch | Ø210 / Ø8.26 | ||
| Center Bore Diameter | mm / inch | Ø65H7 / Ø2.55H7 | ||
| Height of Table (Horizontal) | mm / inch | 280 / 11 | ||
| Height of Center (Vertical) | mm / inch | 210 / 8.26 | ||
| Width of T-slot | mm / inch | 12H7 / 0.47H7 | ||
| Width of Guide Block | mm / inch | 18 / 0.71 | ||
| Clamping Method / Pressure | MPa / psi | P: 0.55~0.7 / 79.7~101 H: 2.5 / 362.5 |
||
| Servo Motor Spec | Refer to Page 78 | |||
| Transmission Ratio | R | T | ||
| 1:90 | 1:90 | |||
| Max. Table Speed / At Specified Servo Motor Speed | min-1 | 33.3 / 3000 | 22.2 / 2000 | |
| Clamping Torque | N.m / ft. lbs. | 400 / 295 600 / 442 |
600 / 442 800 / 590 |
|
| Allowable Loading Capacity | In Horizontal |
kg / lb | 100 / 220 | |
In Tilting (0~90°) |
kg / lb | 70 / 154 | ||
| Allowable Unbalancing Work Moment | WxL |
N.m / ft. lbs. | 62 / 46 | |
|
FxL When Table Clamped |
F  |
N / lbs. | 14000 / 3147 | |
FxL  |
N.m / ft. lbs. | 400 / 295 600 / 442 |
||
FxL  |
N.m / ft. lbs. | 600 / 442 800 / 590 |
||
| Allowable Loading Inertia | (W.D2/8)  |
kg.m2 | 0.55 | |
| Resolution | deg. | 0.001 | ||
| Indexing Accuracy | sec | 15 | 50 | |
| Repeatability (ISO 230-2 / JIS B6192) | sec | 6 | 8 | |
| Repeatability (JIS B6330) | sec | 4 | 4 | |
| Tilting Angle Range | deg. | -30 ~ +120 | ||
| Net Weight (Servo Motor Excluded) | kg / lb | 230 / 507 | ||
| Allowable Cutting Torque | N.m / ft. lbs. | 250 / 184 | ||
| Allowable Max. Rotary Joint Quantity | Port | 4 | ||
Note:
1. R: Rotary Axis T: Tilt Axis
2. FxL When table clamped is a reference data, the users should consider proper safety factor or contact detron for details.
1. R: Rotary Axis T: Tilt Axis
2. FxL When table clamped is a reference data, the users should consider proper safety factor or contact detron for details.
