- Home
- Products
- 5 Axis
- GTFAE-L(S) Series
- CNC Trunnion Tilting Rotary Table ø410
CNC Trunnion Tilting Rotary Table
ø410
GTFAE-410XBL(S) / HL(S)
Worktable diameter Ø410, Ø500.
The hydraulic brake equipped with radial and axial bearings.
Full gear depth transmitted by dual lead worm drive, resulting in higher efficiency and lower backlash.
Enlarged swing to allow more working envelope.
Sub- table available as "S" model.
- SPECIFICATIONS
Specifications
| MODEL | Unit | GTFAE-410XBL(S) | GTFAE-410HL(S) | |||
|---|---|---|---|---|---|---|
| Worktable Diameter | mm / inch | Ø410 / Ø16.14 | Ø410 / Ø16.14 | |||
| Center Bore Diameter | mm / inch | Ø70H7 / Ø2.76H7 | Ø70H7 / Ø2.76H7 | |||
| Height of Table (Horizontal) | mm / inch | 411 / 16.18 | 370 / 14.57 | |||
| Height of Center (Vertical) | mm / inch | 411 / 16.18 | 370 / 14.57 | |||
| Width of T-slot | mm / inch | 14H7 / 0.55H7 | 14H7 / 0.55H7 | |||
| Clamping Method / Pressure | MPa / psi | *P: 0.6~0.7 / 87~101.5 | *H: 5 / 725 | |||
| Servo Motor Spec | Refer to Page 78 | |||||
| Transmission Ratio | R | T | R | T | ||
| 1 : 120 | 1 : 150 | 1 : 120 | 1 : 120 | |||
| Max. Table Speed / At Specified Servo Motor Speed | min-1 | 16.6 / 2000 | 11.1 / 1665 | 16.6 / 2000 | 11.1 / 1332 | |
| Clamping Torque | N.m / ft. lbs. | 1600 / 1180 | 2000 / 1475 | 1600 / 1180 | 2000 / 1475 | |
| Allowable Loading Capacity | In Horizontal |
kg / lb | 200 / 440 | 200 / 440 | ||
In Tilting (0~90°) |
kg / lb | 150 / 330 | 150 / 330 | |||
| Allowable Unbalancing Work Moment | WxL |
N.m / ft. lbs. | 200 / 147.40 | 200 / 147.40 | ||
|
FxL When Table Clamped |
F  |
N / lbs. | 20000 / 4488 | 20000 / 4488 | ||
FxL  |
N.m / ft. lbs. | 1600 / 1180 | 1600 / 1180 | |||
FxL  |
N.m / ft. lbs. | 2000 / 1475 | 2000 / 1475 | |||
| Standard Loading Inertia | (W.D2/8)  |
kg.m2 | 4.3 | 4.3 | ||
| Resolution | deg. | 0.001 | 0.001 | |||
| Indexing Accuracy | sec | 15 | 60 | 15 | 60 | |
| Repeatability | sec | 6 | 8 | 6 | 8 | |
| Tilting Angle Range | deg. | -120 ~ +30 | -120 ~ +30 | |||
| Net Weight (Servo Motor Excluded) | kg / lb | 1020 / 2175 | 850 / 1860 | |||
| Allowable Cuting Torque | N.m / ft. lbs. | 780 / 569.4 | 780 / 569.4 | |||
| Allowable Max. Rotary Joint Quantity | Port | 6 | 6 | |||
Note:
1. P: Pneumatic H: Hydraulic R: Rotary Axis T: Tilt Axis
2. FxL When table clamped is a reference data, the users should consider proper safety factor or contact detron for details.
1. P: Pneumatic H: Hydraulic R: Rotary Axis T: Tilt Axis
2. FxL When table clamped is a reference data, the users should consider proper safety factor or contact detron for details.
